|
Post by russhood on Nov 26, 2008 19:38:10 GMT
|
|
|
Post by Willow on Nov 27, 2008 12:15:06 GMT
yes - easy russ take the bumper of then fit - done 4 so far bout 2 hrs
|
|
|
Post by russhood on Nov 27, 2008 20:10:30 GMT
CheeRS Willow But how easy is it to take off the bumper With out scratching it
|
|
|
Post by Willow on Nov 28, 2008 17:56:17 GMT
easy
jack car up take the wheels off
undo the push fits on the arch liner to the bumper including the torx bolts
pull liner out the way undo 3 10mm bolts along the inner edge of bumper where it meets the wings
now get under the car and remove the 4 push fits along the front cross member (just behind the blade thing)
take off the grill by removing the slam panel cover (4 screws) 2 10mm bolts to take off the grill
the bumper needs to be pulled gently away from the car using the bottom edge and slightly upwards - better with 2 people
undo the 14 screws holding the undertray on then sandwich the tray between the bumper and the blade
refit bumper in opposite way to removal
or arrange a time and i'll do it for you
|
|
|
Post by russhood on Nov 29, 2008 18:03:04 GMT
CheeRS mate
|
|
|
Post by Willow on Nov 30, 2008 9:43:17 GMT
na probs
|
|
|
Post by tgh269 on Nov 30, 2008 12:56:37 GMT
Russ
If you want to catch my Volvo the splitters gonna slow you down !!!! Looks good though if 09 is kind to me Im gonna have get one. (fitted by Willow of course)
|
|
|
Post by russhood on Dec 4, 2008 17:06:06 GMT
hi willow, just got it and looked at it Do you have to drill it and what bolts do i need? CheeRS russ
|
|
|
Post by Willow on Dec 4, 2008 17:42:21 GMT
i'd hope it's pre drilled!!!! - should have 14 holes at probably 12inch centers around the inner lip from corner to corner
bolts are M8 40mm get lock nuts and washers too - maybe go for the 50mm bolts to be double safe oh and get a1 stainless!!!!!!!
|
|
|
Post by russhood on Dec 4, 2008 18:30:53 GMT
not happy, not drilled and badly scratched sending it back and 12 holes only are marked on it!
|
|
|
Post by tgh269 on Dec 4, 2008 21:11:03 GMT
Did you get from the same supplier as Willow? if not try and get a refund then get from his supplier
Oh Russ, Car looked good last night well shiney!
|
|
|
Post by Willow on Dec 4, 2008 21:14:15 GMT
you need to get it from Shins on the national site - his come from creative carbon pre drilled and are cheaper!
I think Mr Hutches only had 12 holes too and i got that from my normal supplier!
Oh tell shins RSWillow sent you - i've had 3 off him with no issues!
|
|
|
Post by russhood on Dec 5, 2008 17:43:15 GMT
CheeRs gents but they are giving me a swap. Apparently it's the first one out of the mould
|
|
|
Post by Willow on Dec 7, 2008 16:06:36 GMT
CheeRs gents but they are giving me a swap. Apparently it's the first one out of the mould hmmm smells of habour side!!! bit fishy!
|
|
|
Post by russhood on Dec 12, 2008 17:53:32 GMT
Got it at last Fitting it sunday with alot of help from james king
|
|
|
Post by Willow on Dec 16, 2008 8:17:35 GMT
excellent news!
|
|
|
Post by russhood on Dec 16, 2008 19:03:31 GMT
JOB DONE!!!
|
|
|
Post by Willow on Dec 16, 2008 19:17:08 GMT
and a good job it was too!!!!
See not to difficult was it!
|
|